Professional Air-to-Water Heat Pumps solutions in Galway by Finvarra Ltd. 30+ years of experience. Honest, reliable, local experts.
What is an air-to-water heat pump?
An air-to-water heat pump is a heating system that takes heat from the outside air and uses it to warm the water in your radiators, underfloor heating and hot water cylinder. It does the same job your oil boiler does today, heating the house and giving you hot water for showers and taps, but it runs on electricity and burns no fuel.
There are two main parts. Outside, a unit about the size of a large suitcase standing on its side sits against a wall or on a small base in the garden. Inside, a hot water cylinder, usually in the hot press or utility room, stores your hot water. Insulated pipes connect the two, and the heat pump sends warm water around the same kind of pipework and radiators you already know.
The big difference is how the heat is made. A boiler burns oil to create heat. A heat pump moves heat that is already in the air, even on a cold, wet Galway morning, and concentrates it. Because it is moving heat instead of making it, a well-designed system gives out around three to four units of heat for every unit of electricity it uses.
A heat pump also heats differently from a boiler. It runs the water at a lower temperature, steadily and for longer, so the house stays at an even warmth instead of going hot and cold. That is why insulation and radiator sizes matter so much, and why the survey before the install is the most important part of the job.
Air-to-water is the most common type of heat pump fitted in Irish homes, and it is the type the main SEAI grant is built around. The SEAI heat pump system grant now reaches up to €14,500 for a qualifying house.
At Finvarra Ltd, we install air-to-water heat pumps for homeowners across Galway and the surrounding areas. Because we are plumbers first, we look at the whole heating system, from the pipework and radiators to the cylinder, and not only the unit outside.
How does an air-to-water heat pump actually work?
An air-to-water heat pump works by collecting heat from the outside air, raising it to a useful temperature, and passing it into the water that heats your home. It is the same idea as a fridge, working in reverse. A fridge pulls heat out of the food and releases it at the back, while a heat pump pulls heat out of the air and releases it into your heating system.
The cycle has four steps. First, a fan in the outdoor unit draws air across a coil filled with refrigerant, a liquid that boils at a very low temperature. Even air at two or three degrees holds enough heat to turn it into a gas. Second, a compressor squeezes that gas, which makes it much hotter. Third, the hot gas passes through a heat exchanger, where it hands its heat over to the water in your heating system. Fourth, the refrigerant cools, turns back into a liquid and goes around again.
The warmed water is then pumped to your radiators or underfloor heating, and to the coil inside your hot water cylinder. The heat pump's controller decides where the heat goes, and gives priority to hot water when the cylinder needs topping up.
Most modern units also use weather compensation. A small sensor reads the outdoor temperature and the heat pump adjusts how warm it makes the water: cooler water on a mild day, warmer water on a cold one. This keeps the house steady and the electricity use low. You set the room temperature you want and largely leave it alone.
In frosty weather the outdoor coil can ice up, so the unit runs a short defrost cycle every so often. You may see a little steam or water under the unit. That is normal.
Manufacturers explain the cycle well, and Daikin's guide to how a heat pump works is a clear one to read.
What matters most is that the system is matched to the house. A heat pump is at its most efficient when it only has to heat the water to around 35 to 45°C, so the radiators and pipework have to be sized to suit. That is the part of the job our plumbing background at Finvarra Ltd is built for, in homes right across Galway.
What types of air-to-water heat pumps are available?
There are three main choices when you pick an air-to-water heat pump: a monobloc or a split system, a low-temperature or a high-temperature unit, and the size of the unit in kilowatts. Each suits a different kind of house.
Monobloc. Everything that makes the heat sits in one outdoor unit, and only water pipes run into the house. It is the most common choice for existing homes around Galway because it is simpler to fit and there is no refrigerant pipework indoors. The outdoor unit needs to be reasonably close to the cylinder, and the outside pipes must be well insulated.
Split. The system is divided between an outdoor unit and an indoor unit, joined by refrigerant pipes. It suits houses where the outdoor unit has to sit further from the hot press, and there is no water outside to protect from frost. The indoor unit takes up some space.
Low-temperature. These are the standard units, heating water to around 35 to 55°C. They are the most efficient and work best with underfloor heating or correctly sized radiators in a well-insulated home.
High-temperature. These can heat water to 65°C or more, closer to what an oil boiler produces. They can suit older houses where changing every radiator isn't practical. They use more electricity at the higher temperatures, so they are not a way around poor insulation.
Integrated or separate cylinder. Some systems come with an all-in-one indoor unit that has the cylinder built in, about the size of a tall fridge-freezer. Others use a separate heat pump cylinder in the hot press. The choice usually comes down to the space you have.
Size. Domestic units generally run from about 4kW to 16kW. Bigger is not better. An oversized heat pump switches on and off too often, and an undersized one struggles in a cold snap. The right size comes from a room-by-room heat loss calculation.
Manufacturer ranges show the options well, such as Mitsubishi Electric's Ecodan heat pump range.
At Finvarra Ltd, we look at your house first and recommend the type second, so the system fits the home and not the other way round.
What makes an air-to-water heat pump different from other plumbing and heating services?
An air-to-water heat pump installation is different because it is a whole-system job, not a like-for-like swap. Replacing a boiler or fixing a radiator deals with one part of the heating. Fitting a heat pump means checking, and often changing, every part of it so the house heats properly at a lower water temperature.
It starts with design. Before anything is ordered, the heat loss of every room is worked out: the size of the room, the walls, the windows and the insulation. That tells us what size heat pump the house needs and whether each radiator can give out enough heat. No other domestic heating job depends as much on getting the sums right at the start.
The work covers more of the house. A typical install includes the outdoor unit, a new heat pump cylinder, some new or larger radiators, pipework changes, new controls and the electrical connection. It usually takes several days, where most plumbing repairs take hours.
There is paperwork too. Most homeowners use the SEAI grant, and that brings rules that don't apply to ordinary plumbing work. The grant must be approved before work starts, the home has to meet a heat loss standard, and a BER is carried out afterwards. The grant is only paid when the installer is on the SEAI register, so who you choose matters.
The way you use it is different. A boiler is switched on for a few hours and blasts heat. A heat pump runs gently for long periods and keeps the house at an even temperature. Part of our job is setting the controls up correctly and showing you how to live with it, so the running costs stay low.
It is a long-term decision. A heat pump is one of the bigger investments you will make in your home, and it should serve you for many years. That is why the advice before the install is as important as the install itself.
Finvarra Ltd is SEAI registered and plumber-led. We understand pipework, radiators and cylinders as well as heat pumps, so one team looks after the full system in your Galway home, from the first survey to the last radiator.
What should homeowners know before starting an air-to-water heat pump installation?
Before you start, the most important thing to know is that a heat pump only works well in a house that holds its heat. Insulation comes first and the heat pump second. Get that order right and the rest of the project is much simpler.
Check your home's heat loss. To qualify for the SEAI grant, a home must have a heat loss indicator of 2.3 or lower. This is a number that shows how quickly the house loses heat. Homes built before 2007 generally need a technical assessment by an SEAI registered Technical Advisor, who will tell you whether the house is ready or needs attic, wall or window upgrades first.
Apply for the grant before any work starts. This catches people out. If work begins before SEAI approves the grant, the grant is lost. The house must also have been built and occupied before 2021.
Expect some changes indoors. Most homes need a new hot water cylinder, and some radiators may need to be larger. You will need space in the hot press or utility room for the cylinder.
Think about where the outdoor unit will go. It needs open air around it, a firm base and a short route for the pipes. Most domestic heat pumps don't need planning permission as long as they meet conditions on size, position and noise, and the rules were updated in July 2026. Galway City Council's notice on the 2026 exempted development changes is a useful starting point, and your local planning office can confirm for your site.
Plan the timing. The install takes several days and you will be without heating and hot water for a day or two. Spring, summer and early autumn are the easiest times.
Budget for your share. The grant is paid after the work is finished and signed off, so ask how payment is handled.
Look at your electricity plan. Running costs depend on your electricity rate, so it is worth checking your tariff before the system goes in.
At Finvarra Ltd, we go through all of this at the survey. You get straight advice on whether your Galway home is ready for a heat pump now, or what to do first if it isn't.
How much does an air-to-water heat pump cost in Galway?
A full air-to-water heat pump installation in Galway usually costs somewhere between €10,000 and €20,000 before grants. For a qualifying house, the SEAI grant can now take up to €14,500 off that figure.
The grant has three parts: up to €10,500 for the heat pump itself, up to €2,000 for central heating upgrades such as radiators and pipework, and €2,000 for boiler scrappage when the heat pump replaces an oil boiler or a solid fuel system. The grant can never be more than the cost of the work, and not every home qualifies for every part.
Where your home lands in the price range depends on a few things.
Size and heat loss. A larger or less insulated house needs a bigger heat pump.
Radiators. Heat pumps run the water cooler than an oil boiler, so some rooms may need larger radiators to stay warm.
Hot water cylinder. Most homes need a new cylinder made for a heat pump, and the old copper one in the hot press comes out.
Pipework. Older houses that were extended over the years often have narrow or patched pipework that needs upgrading.
Outdoor unit position and electrics. A long pipe run back to the cylinder, or an upgrade at the fuse board, adds to the cost.
As a guide, a well-insulated house with good-sized radiators sits towards the lower end. An older house needing several radiators, a new cylinder and pipework changes sits higher.
For a national comparison, SEAI's recorded median costs put a heat pump project at roughly €16,000 to €17,000 for a house, which sits inside the range above.
Remember the costs outside the install too. A technical assessment may be needed before you apply, and if the house needs insulation first, that is a separate job with its own SEAI grants.
Running costs matter as much as the upfront price. In a well-insulated home, a heat pump generally costs less to run than oil, with no tank to fill and no deliveries to arrange.
Two houses of the same size can need very different systems, so a price over the phone is only ever a rough guide. Finvarra Ltd will survey your home room by room and give you a clear written price for your house in Galway.
What are good brands for air-to-water heat pumps?
Firebird, Daikin and Mitsubishi Electric are three of the most trusted names for air-to-water heat pumps in Irish homes, and they are the brands Finvarra Ltd works with. A good brand matters, but it matters less than a good design and a proper installation.
Firebird. Firebird is an Irish heating manufacturer that many homeowners already know from the boiler in their shed or utility room. Its Enviroair air source heat pump range comes in sizes to suit most houses and is designed to work with matching cylinders, radiators and underfloor heating. For a home moving on from a Firebird boiler, it is a familiar name.
Daikin. Daikin is one of the world's largest heat pump manufacturers. Its Altherma range is widely fitted in Ireland, in new builds and in older homes, and it includes both low-temperature and high-temperature models.
Mitsubishi Electric. The Ecodan range is another common sight outside Irish homes. It comes in a wide spread of outputs, so there is usually a model to match the heat loss of the house closely.
Whatever the brand, these are the things worth checking.
Efficiency rating. Look at the energy label for both heating and hot water. The higher the rating, the less electricity the unit uses for the same heat.
Noise level. Check the sound rating, especially if the unit will sit near a neighbour's boundary or under a bedroom window.
Warranty. Ask how long it lasts and what you need to do to keep it valid.
Parts and support in Ireland. A brand with technical backup in this country means faster answers if something goes wrong.
Grant eligibility. The model has to meet the standards SEAI sets for the grant.
Controls. You will use them for years, so they should be simple, ideally with a phone app.
One honest point: the best heat pump on the market will run badly if it is the wrong size or is connected to radiators that are too small. A mid-range unit that is correctly sized and well installed will beat a premium unit that isn't.
At the survey, we recommend the brand and model that fits your Galway home, your hot water needs and your budget, and we explain why.
Does my existing system impact an air-to-water heat pump installation?
Yes. Your existing heating system has a big effect on how the job is designed, how long it takes and what it costs. A heat pump connects into what is already in the house, so the condition of your radiators, pipework and cylinder matters as much as the new unit.
Your current boiler. If the heat pump is replacing an oil boiler or a solid fuel system, the house can qualify for the €2,000 boiler scrappage part of the SEAI grant. The old boiler is disconnected and removed as part of the job. It is worth deciding at the start what will happen to the oil tank.
Radiators. A heat pump sends cooler water around the system than a boiler does. Radiators that were fine at boiler temperatures may be too small to heat the room. A room-by-room calculation shows which ones can stay and which need to be larger. Often it is only a few rooms.
Pipework. Many Galway homes have had rooms and extensions added over the years, with pipework to match. Very narrow pipes can restrict the flow a heat pump needs. We check pipe sizes and routes at the survey and upgrade only where it is needed.
Hot water cylinder. A standard copper cylinder is rarely suitable. Heat pumps need a cylinder with a much larger coil inside, so a new one is normally part of the install.
Water quality. Years of rust and sludge in old radiators can damage a new heat pump. The system is flushed and a filter fitted, so the new equipment starts with clean water.
Underfloor heating. If you already have it, that is good news. Underfloor heating runs at low temperatures and suits a heat pump very well.
Controls and electrics. Old timers and thermostats are replaced with controls made for the heat pump. The fuse board is checked too, as the unit needs its own supply.
The better the condition of what is already there, the simpler the job. Finvarra Ltd repairs and upgrades wet heating systems as well as fitting heat pumps, so we can tell you plainly what can stay and what has to change in your home.
What's included in the cost of an air-to-water heat pump?
A proper air-to-water heat pump price covers the whole system, from the survey to the day you are shown how to use it. When you compare quotes in Galway, check that each one includes the same things, because a low price often means something has been left out.
A full installation would normally include:
Survey and design. A visit to the house and a room-by-room heat loss calculation to size the heat pump and radiators.
The heat pump unit. The outdoor unit, its base or wall brackets, and anti-vibration mounts.
Hot water cylinder. A new cylinder made for a heat pump, fitted in the hot press or utility room.
Radiator upgrades. Any new or larger radiators the design calls for.
Pipework. Insulated pipes between the outdoor unit and the house, and any changes needed inside.
Controls. The heat pump controller, room thermostats and the outdoor sensor.
Electrical connection. A dedicated supply to the unit, carried out by a registered electrician.
Removing the old system. Disconnecting and taking away the old boiler and cylinder.
Flush and filter. Cleaning the existing system and fitting a filter to protect the new equipment.
Commissioning. Setting the system up, testing it and balancing the radiators.
Handover. Showing you the controls and leaving you the manuals and warranty details.
Grant paperwork from the installer. The documents SEAI needs from the contractor once the work is complete.
Some things are often priced separately, so ask about them: the technical assessment before the grant application, the BER after the work, any insulation upgrades, removing the oil tank, and making good to decoration or flooring. For a wider view of what goes into the price, this guide to heat pump costs in Ireland is a helpful read.
Ask for the quote in writing with each item listed. That way you can see what you are paying for, and nothing comes as a surprise once the work has started.
At Finvarra Ltd, our quotes set out what is included and what is not, in plain language, so you can compare like with like.
Don't rely on rough guesses for heat pump costs. Get a proper assessment. We can often give you an initial idea over the phone after a few questions about your home and current heating, or we'll arrange a free site visit to give you accurate pricing for your Galway home.
Should I consider an air-to-water heat pump?
You should consider an air-to-water heat pump if your house is reasonably well insulated, your current heating is due for replacement, and you want lower running costs without depending on oil. With the SEAI grant now worth up to €14,500 for a qualifying house, more homeowners in Galway are in a position to make the switch than ever before.
A heat pump is likely to suit you if:
Your oil boiler is getting old. If it is unreliable, costly to keep going or facing a big repair, that is the natural moment to look at the alternative before spending money on it.
Your home holds its heat. Houses built since the mid-2000s, and older homes that have had the attic, walls and windows upgraded, are usually good candidates.
You are renovating or extending. If floors, radiators or pipework are being disturbed anyway, it is the cheapest time to get the house ready.
You want steadier comfort. A heat pump keeps the whole house at an even temperature all day, instead of heating in bursts.
You are tired of oil. No deliveries, no tank to watch and no price swings from one fill to the next.
You plan to stay in the house. The savings build over years, and a better BER adds to the value of the home.
It may be better to wait if:
The house is draughty or poorly insulated. A heat pump in a leaky house runs hard and costs more than it should. Insulate first.
Your boiler is nearly new and running well. There is no rush. Plan the upgrade for when it makes sense.
The budget is tight this year. The grant covers a large share of the cost, but as this report on what homeowners still pay points out, it does not always cover everything.
If you are unsure which group you fall into, a survey will settle it. We look at the insulation, radiators, pipework and cylinder and tell you honestly whether a heat pump stacks up for your home now, later, or after some upgrades.
Finvarra Ltd would sooner tell you to wait than fit a system that won't perform. That honesty is why our customers across Galway trust our advice.
What brands do you install in Galway?
Finvarra Ltd installs air-to-water heat pumps from Firebird, Daikin and Mitsubishi Electric in homes across Galway. We stick to established manufacturers with proven products and technical support in Ireland, because a heat pump has to work reliably for many years after we leave.
Firebird Enviroair. Firebird is an Irish company and a name most households here already know. Its Enviroair air-to-water heat pumps are designed to pair with Firebird's own cylinders and underfloor heating, which makes for a tidy, well-matched system. It is a natural choice for a family that has had a Firebird boiler for years and trusts the brand.
Daikin Altherma. Daikin has been making heat pumps for decades, and the Altherma range is one of the most widely installed in the country. This Engineers Ireland article on the Daikin Altherma 3 gives a good picture of the technology. The range includes standard models for well-insulated homes and high-temperature models for houses that need warmer water in the radiators.
Mitsubishi Electric Ecodan. The Ecodan range covers small, medium and large homes, with outdoor units built for quiet running. That makes it a good fit where the unit has to sit close to a neighbour or a bedroom.
We don't push one brand over another. The choice comes from the survey, and it depends on:
The heat loss of the house. Each range comes in different sizes, and the closest match to your home's needs is the right one.
The water temperature your radiators need. This decides between a standard and a high-temperature model.
The space available. Some systems have a compact all-in-one indoor unit, while others use a separate cylinder.
Where the outdoor unit will sit. Size and sound level both matter.
Your budget. We will explain the price difference between options and what you get for it.
The cylinder, controls and any new radiators are chosen to suit the heat pump, so the whole system works together.
If you have a brand in mind, tell us. We will give you a straight answer on whether it suits your Galway home.
How Long Does an Air-to-Water Heat Pump Installation Take?
The installation itself usually takes somewhere between three days and a week. The full journey, from first phone call to a working system with the grant paid, is longer, mainly because of the survey, assessment and grant approval that come first. It helps to think of it in stages.
1. Survey and quote. We visit the house, measure the rooms, look at the radiators, pipework and cylinder, and work out the heat loss. The visit takes an hour or two, and the written quote follows.
2. Technical assessment. Homes built before 2007 generally need an assessment by an SEAI registered Technical Advisor before the grant application. This is booked separately, and how soon it happens depends on the advisor's diary.
3. Grant application and approval. You apply to SEAI and wait for the grant offer. No work can start until it arrives. This guide to SEAI grants and how to apply sets out the steps. Allow a few weeks for stages 2 and 3 together.
4. Ordering and booking. Once the grant is approved, the heat pump, cylinder and radiators are ordered and a start date is agreed.
5. Installation. On a typical job, the old boiler and cylinder come out, the new cylinder and outdoor unit go in, radiators and pipework are upgraded, and the electrics are connected. A simple swap in a well-prepared house is at the shorter end. A house needing many radiators and pipework changes takes longer.
6. Commissioning and handover. The system is filled, tested and set up for your house, and we show you how the controls work.
7. BER and grant payment. After the work, a BER assessment is carried out and the paperwork goes to SEAI, which then pays the grant.
During the install, expect to be without heating and hot water for a day or two while the changeover happens. We tell you in advance which days those will be, so you can plan around them.
The best way to keep things moving is to start early. Homeowners who begin in spring or summer have the system running well before the cold weather, with no pressure on the dates.
Finvarra Ltd will give you a realistic timeline for your Galway home at the survey, and we keep you updated at each stage.
Types of Air-to-Water Heat Pumps .
The right type of air-to-water heat pump depends on the house it is going into. The technology is the same in every case, but the layout, water temperature and size change to suit the home. These are the setups we fit most often around Galway, and the houses each one suits.
Monobloc system with radiators. This is the most common setup for an existing home. One outdoor unit does all the work and connects by water pipes to a new cylinder indoors. It suits well-insulated houses with a hot press or utility room close to an outside wall. Daikin's launch of its Altherma monobloc heat pump describes the idea well: a compact outdoor unit for homes with limited space inside.
Split system. The outdoor unit is paired with an indoor unit, often with the cylinder built in. It suits homes where the outdoor unit has to sit further from the house, or where a neat all-in-one unit indoors is preferred.
Heat pump with underfloor heating. Underfloor heating warms the room from a large surface at a low water temperature, which is exactly how a heat pump runs best. It is the usual choice in new builds and a good option when floors are being replaced in a renovation.
Heat pump with underfloor downstairs and radiators upstairs. Many newer houses are built this way. The heat pump controls two zones at two different water temperatures, so each floor gets what it needs.
High-temperature heat pump. These units produce hotter water for the radiators. They can be the practical answer in an older home where replacing every radiator and pipe run is not realistic. They cost more to run at high temperatures, so we only recommend them where the house calls for it.
Small-capacity units. Compact heat pumps of 4kW to 6kW suit smaller, highly insulated homes, where a larger unit would be wasted.
Larger units. Bigger detached houses, common in rural parts of the county, may need 12kW to 16kW, and the pipework has to be sized to match.
Two things stay the same across every type: the system must be sized from a proper heat loss calculation, and it must be set up carefully on the day it is switched on.
Finvarra Ltd will explain which type fits your home and why, in plain terms, before you commit to anything.
How to Choose the Right Air-to-Water Heat Pump Solution.
Choosing the right air-to-water heat pump comes down to matching the system to your house, not picking the biggest unit or the best-known brand. A heat pump that is sized and set up for your home will be comfortable and cheap to run. One that isn't will disappoint, whatever the badge on the front. These steps will get you to the right answer.
Start with the house, not the heat pump. Find out how well your home holds heat. Your BER certificate is a good first clue, and a technical assessment will give you the full picture. If insulation is needed, do it first.
Insist on a heat loss calculation. The size of the heat pump should come from a room-by-room calculation, never from a rule of thumb or the size of your old boiler. Ask to see it.
Check the radiators and pipework. A good installer will tell you which radiators can stay and which need upgrading, and whether the pipework can carry the flow. If nobody looks at them, be wary.
Think about hot water. The cylinder should be sized for the number of people in the house and how you use hot water. A family of five needs more than a couple.
Pick a sensible spot for the outdoor unit. It needs clear airflow, should be close to the cylinder, and should be away from bedroom windows and neighbours where possible.
Compare quotes like for like. Check that each quote covers the same items: cylinder, radiators, controls, electrics, flushing and commissioning. Independent guides such as this overview of heat pumps in Ireland can help you understand what you are reading.
Check the installer is SEAI registered. Without that, you cannot get the grant.
Ask about controls and handover. You should be shown how to run the system and what settings to leave alone.
Ask who to call afterwards. Find out who looks after the system if there is a problem, and what the warranty covers.
Don't choose on price alone. The cheapest quote often leaves out radiator upgrades or a proper design, and you pay for that later in comfort and electricity.
Finvarra Ltd will walk you through each of these points at the survey. You will know what your Galway home needs, what it will cost and what the grant will cover before you decide.
CALL NOW
What Are the Reasons to Hire a Professional for Air-to-Water Heat Pump Solutions?
The main reason to hire a professional is simple: a heat pump is only as good as its design and installation, and the SEAI grant is only paid when a registered contractor does the work. This is not a job for a handyman or a weekend project. Here is why.
You need an SEAI registered installer to get the grant. The SEAI heat pump grant of up to €14,500 for a qualifying house depends on it. Use someone who isn't on the register and you pay the full cost yourself.
The design decides the result. Sizing the heat pump, the radiators, the pipework and the cylinder takes training and experience. A mistake at this stage leads to cold rooms and high electricity bills that no amount of adjusting afterwards will fix.
It involves several trades. A heat pump install brings together plumbing, electrical work and, on some systems, refrigerant pipework. Each has its own regulations, and the work has to be carried out and signed off by qualified people.
Hot water safety matters. Modern cylinders store water under pressure and need the correct safety valves and controls. Fitted wrongly, they are a real hazard.
The warranty depends on it. Manufacturers expect their heat pumps to be installed and commissioned to their instructions. A poor installation can leave you without cover when you need it.
Commissioning makes the difference. Setting the flow rates, the weather compensation and the hot water schedule properly is what keeps running costs low. It is skilled work that takes time on the day.
One point of responsibility. With one professional looking after the full system, there is no argument about who is at fault if something isn't right. You know who to call.
It protects your home's value. A properly installed and documented system improves your BER. A poor one can cause problems when you come to sell.
You get honest advice first. A good professional will tell you if your house isn't ready and what to do about it, before you spend anything on equipment.
Finvarra Ltd is SEAI registered and brings a lifetime in plumbing and heating to every job. We design and install the whole system, from the outdoor unit to the last radiator, for homeowners across Galway and the surrounding areas.
What Are the Reasons to Hire a Professional for Air-to-Water Heat Pump Solutions?
The main reason to hire a professional is simple: a heat pump is only as good as its design and installation, and the SEAI grant is only paid when a registered contractor does the work. This is not a job for a handyman or a weekend project. Here is why.
You need an SEAI registered installer to get the grant. The SEAI heat pump grant of up to €14,500 for a qualifying house depends on it. Use someone who isn't on the register and you pay the full cost yourself.
The design decides the result. Sizing the heat pump, the radiators, the pipework and the cylinder takes training and experience. A mistake at this stage leads to cold rooms and high electricity bills that no amount of adjusting afterwards will fix.
It involves several trades. A heat pump install brings together plumbing, electrical work and, on some systems, refrigerant pipework. Each has its own regulations, and the work has to be carried out and signed off by qualified people.
Hot water safety matters. Modern cylinders store water under pressure and need the correct safety valves and controls. Fitted wrongly, they are a real hazard.
The warranty depends on it. Manufacturers expect their heat pumps to be installed and commissioned to their instructions. A poor installation can leave you without cover when you need it.
Commissioning makes the difference. Setting the flow rates, the weather compensation and the hot water schedule properly is what keeps running costs low. It is skilled work that takes time on the day.
One point of responsibility. With one professional looking after the full system, there is no argument about who is at fault if something isn't right. You know who to call.
It protects your home's value. A properly installed and documented system improves your BER. A poor one can cause problems when you come to sell.
You get honest advice first. A good professional will tell you if your house isn't ready and what to do about it, before you spend anything on equipment.
Finvarra Ltd is SEAI registered and brings a lifetime in plumbing and heating to every job. We design and install the whole system, from the outdoor unit to the last radiator, for homeowners across Galway and the surrounding areas.
When you’re comparing plumbing and heating contractors, the credentials can be confusing. One matters most: SEAI registration. It isn’t just a logo on a van. SEAI registration means your installer is on the official register, and it is what gives you access to government grants for heat pumps and heating upgrades.
For property owners in Galway, checking that your plumber is SEAI registered is essential. It means the work meets the required standards, your home is protected from costly mistakes, and you can claim the grants you’re entitled to.
In addition to our primary expertise, we specialise in tailored Plumbing and Heating solutions. This includes expert heat pump installation and replacement solutions designed for commercial and residential properties across the greater Galway region. Government grants and financial incentives may also be available to you. Discover our complete range of services here.
Real jobs we’ve done over the past few years, for people who wanted air-to-water heat pumps, underfloor heating, or central heating repairs & fault finding.We deliver premium solutions paired with public sector knowhow, whether you need to navigate Plumbing and Heating government funding programs or get in touch with local county council chambers for best practices and expert advice. From residential Plumbing and Heating services throughout Galway, these are actual customers from Galway and the surrounding areas that we work with every week.

At Finvarra Ltd, we know how stressful it can be when things go wrong. That is why we are always on hand to get things sorted quickly and professionally, no matter the size or complexity of the task. Whether you need a air-to-water heat pumps,underfloor heating, or central heating repairs & fault finding, we have you covered. We show up, we do the job right, and we leave your property clean and tidy. Fully certified, and insured for your complete peace of mind. Over 30+ years of industry experience you can truly rely on. You can count on our local, experienced team to treat your property with care and deliver the professional, dependable service you expect and deserve.
Copyright 2026. Finvarra Ltd. All Rights Reserved.